Our Utility / Die Cutting Press

PRICES Utility / Die Cutting Press: $460.00 Cutting Board: $20.00 Cutting Dies: Button Size Price Button Size Price 1" $149.00 3-1/2" $225.00 1-1/4" $149.00 6" $250.00 1-1/2" $149.00 1-3/4'' X 2-3/4'' Rectangular $495.00 1-3/4" $149.00 2'' X 3'' Rectangular $495.00 2-1/4" $195.00 Badge A Minit 2-1/4" $195.00 3" $195.00

If you're making a lot of buttons and are ready to move up to a more efficient cutter, the Utility / Die Cutting Press (shown on the left) is exactly what you are looking for. It's an incredible piece of equipment and is the cutter we use to cut all the button designs we produce at Dr. Don's Buttons Except for the aluminum work table, the press is made of structural steel with hardened tool steel pivot pins to provide a long service life. The T-bar handle is convenient for left, right, or two-hand operation. It is ergonomically designed so the handle approaches the work zone at the bottom end of the working stroke to minimize unnecessary motion by the operator. The press ram has an adjustment screw that allows the cutting or pressing to be completed when the operating handle is at the very bottom of its stroke where the mechanical advantage is greatest keeping exertion to an absolute minimum. The design of this press is such that it takes very little effort to cut through 15-20 sheets of standard paper with one stroke of the press. (In plain English, you'll be amazed at how little effort is necessary to cut through a thick stack of paper). A one inch thick plastic cutting board is shown on the press table in the photo. It is used to protect the sharp edges of the cutting dies. If you'd like to order the Utility / Die Cutting Press, just give us a call at (800) 243-8293 or (623) 869-8233. Prices listed on this page are subject to change, without notice.

 

To place an order for a button machine,
or for button-making supplies, click here.