2 1/4-inch Button Making Supplies for BADGE-A-MINIT brand
PLEASE READ NOTICE BELOW BEFORE ORDERING ONLINE
Is your button machine this fast and easy to use? Watch 6 year old Benjamin Singel make a button using our Model 225.
All machines and parts
are made in the USA
PLEASE NOTE: The button-making supplies listed on this page are intended for use in Badge-A-Minit 2-1/4" brand button machine.
They will NOT work in our Model 225 machines!
That's because Badge-A-Minit machines use supplies that are slightly larger than those used in our Model 225.
Order supplies for Model 225 button machine instead. If you are uncertain which button machine you have, please give us a call before placing an order.
Choose US ECONOMY SHIPPING at checkout and receive FREE SHIPPING on your entire order!
Free Shipping offer only available to destinations within the contiguous United States. Orders shipped US Economy will typically be deliveredwithin 7 business days. Do NOT choose US Economy Shipping if you need order in less than 7 business days or a guaranteed delivery date. NEED IT FASTER? If you need your order by a specific date, choose one of the other shipping options, available at an additional cost. Learn more about our Free US Economy Shipping and our other Shipping Options.
MAGNET-BACK BUTTON SETS FOR BADGE-A-MINIT BRAND 2-1/4" BUTTON MACHINES
Magnet-back Button Sets for BADGE-A-MINIT brand 2-1/4" button machines
Include the shells, special button backs without holes or pins, mylar discs (the "plastics") and super-strong one-inch peel and stick adhesive magnets. Everything you need to make high-quality magnet-back buttons, if you have our BADGE-A-MINIT brand 2-1/4" button machine.
1-inch Square Peel and Stick Adhesive Strip Magnets
These magnets measure one inch square and have a handy peel and stick adhesive strip.
They are thick, strong, and easy to apply.
Order 1-inch Square Peel and Stick Adhesive Strip Magnets
Magnetic Button Bars
Order Magnetic Button Bars
1-49 = $.99 ea.
50-99 = $.89 ea.
100+ = $.79 ea.
The best way for you or your customers to wear a button without poking holes in expensive garments is to use a "Magnetic Button Bar" rather than a traditional pin.
Magnetic Button Bars are incredibly strong and have two small, but extremely powerful magnets attached to either end of a metal bar that measures 1-3/4" x 1/2". They will easily hold a button or name badge in place without slipping.
To use Magnetic Button Bar, simply put the bar inside your shirt, blouse or light jacket and it will attract and hold the back of a metal button.
Magnetic button bars are suggested as the best non-pin option for buttons 2-1/4" or larger.
Neo Magnetic Discs
Order Neo Magnetic Discs
1-49 = $.59 ea.
50-99 = $.55 ea.
100+ = $.49 ea.
A less costly non-pin option for wearing buttons are our Neo Magnet Discs.
Neo Magnetic Discs will hold a button in place when worn on a shirt or blouse but are not quite as strong as our magnetic button bars.
(If you will be wearing your button(s) on a light jacket or shirt or blouse made of a thicker material, the Magnetic Button Bar is a much better solution.
KEYCHAIN BUTTON SETS FOR BADGE-A-MINIT BRAND 2-1/4"
Keychain Button Sets for BADGE-A-MINIT brand 2-1/4" button machines
Includes the shells, special key chain backs, key chains and the plastics. Everything you need to make high-quality keychain buttons, if you have our BADGE-A-MINIT brand 2-1/4" button machine.
Unlike Badge-A-Minit's background papers that are perforated and require you to pull each one from the surrounding paper before using them, our background papers are pre-cut to size, so you don't have to mess with them.
Another feature you'll like about our background papers is that one side has a light gray guide that provides a visual cue as to where the edge of the button will be. This feature can be very handy when working with young children so whatever they place on their design ends up on the front of their button, not over the side.
And for those of you who don't want or need this visual guide, we left the reverse side blank.
Additional Mylar discs also known as "the plastics"
Order Additional Mylar Discs
for BADGE-A-MINIIT Brand 2-1/4" Button Machines
BUTTON CIRCLE CUTTERS FOR BADGE-A-MINIT BRAND 2-1/4"
AC-1 Circle Cutter with metal cutting plate and cutting guide insert
Order AC-1 Circle Cutter
Our AC-1 circle cutter is fully adjustable and can be used to cut the artwork for any size button, from a 1-inch all the way up to a 3-1/2" button.
Includes 30 day NO RISK Money-back Guarantee and Limited Lifetime Warranty
Dr. Don's Online Design Studio enables you to design buttons on any computer, anywhere using your browser and an Internet connection. Powerful, easy to use design tools allow you use our library of design templates, add photos, change text and color options. More Information
Premium Button Design CDs
Dr. Don's Button Design CDs provide you with templates and backgrounds to help you make your own button designs. Each collection has over 100 designs.
Order Button Design CDs
At Dr. Don's Buttonswe offer a 30-day
MONEY-BACK GUARANTEE on our button parts and button-making machines.
Dr. Don's Buttons, Badges & More 3906 W. Morrow Drive
Glendale, Arizona 85308